Ilford SIMPLICITY Darkroom Chemistry Film Starter Pack 1178858

Description

Fresh
Stock
Secure
Shipping
Customer Support
Ilford SIMPLICITY Darkroom Chemistry Starter Pack 1178858
Ilford SIMPLICITY Darkroom Chemistry Starter Pack
Chemistry for 1x 120 or 2x 35mm Rolls
1 x 60mL Sachet of Film Developer
1 x 30mL Sachet of Stop Bath
1 x 100mL Sachet of Fixer
Containing all of the necessary chemistry for developing black and white film, the SIMPLICITY Starter Pack from Ilford contains pre-measured portions of four concentrated chemicals to produce working solutions for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank.
IMPLICITY
Film Developer
Film developer sachet contains 60mL of ILFOSOL 3 concentrate, which is then mixed with 540mL of water (1+9 dilution) at temperature to create a 600mL working solution for developing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank.
ILFOSOL 3 is characterized by its ability to produce fine grain results with high sharpness and full film speed, and it is particularly well-suited for use with medium-speed films.
SIMPLICITY
Stop Bath
Stop bath sachet contains 30mL of ILFOSTOP concentrate, which is then mixed with 570mL of water (1+19 dilution) at temperature to create a 600mL working solution for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank.
ILFOSTOP is a low odor, citric acid-based stop bath that stops the development process and helps to prolong the life and activity of the fixer solution. It is recommended to ensure accurate development times.
SIMPLICITY
Film Fixer
Fixer sachet contains 100mL of RAPID FIXER concentrate, which is then mixed with 500mL of water (1+5 dilution) at temperature to create a 600mL working solution for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank.
RAPID FIXER is a rapid-acting, non-hardening fixer that should not be used with any hardeners.
SIMPLICITY
Wetting Agent
Wetting agent sachet contains 25mL of ILFOTOL, of which two cap-fulls are required per use during the final rinse. This sachet contains enough wetting agent for eight rolls of 120 or 16 rolls of 35mm film in a two-reel, 600mL developing tank.
NOTE:
Sorry, no cancellations or returns due to the nature of this product.
Limited Stock. Sometimes there is a shortage on this item. You will be notified immediately if not in stock or available.
Payment
Shipping
Returns
Payment
Shipping
Returns
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Most orders will be shipped within 2-3 working days of receiving payment (Monday-Friday) and you should expect to receive it shortly if shipped via First Class or Priority.
Books, magazines and other preriodicals, are shipped via Economy mail and may take a bit longer and will save you money over the long run.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
( Unless specified in description as Final Sale only )
Any product you return must be in the same condition you received it and in the original packaging.
Ilford SIMPLICITY Darkroom Chemistry Starter Pack Chemistry for 1x 120 or 2x 35mm Rolls 1 x 60mL Sachet of Film Developer 1 x 30mL Sachet of Stop Bath 1 x 100mL Sachet of Fixer Containing all of the necessary chemistry for developing black and white film, the SIMPLICITY Starter Pack from Ilford contains pre-measured portions of four concentrated chemicals to produce working solutions for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank. IMPLICITY Film Developer Film developer sachet contains 60mL of ILFOSOL 3 concentrate, which is then mixed with 540mL of water (1+9 dilution) at temperature to create a 600mL working solution for developing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank. ILFOSOL 3 is characterized by its ability to produce fine grain results with high sharpness and full film speed, and it is particularly well-suited for use with medium-speed films. SIMPLICITY Stop Bath Stop bath sachet contains 30mL of ILFOSTOP concentrate, which is then mixed with 570mL of water (1+19 dilution) at temperature to create a 600mL working solution for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank. ILFOSTOP is a low odor, citric acid-based stop bath that stops the development process and helps to prolong the life and activity of the fixer solution. It is recommended to ensure accurate development times. SIMPLICITY Film Fixer Fixer sachet contains 100mL of RAPID FIXER concentrate, which is then mixed with 500mL of water (1+5 dilution) at temperature to create a 600mL working solution for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank. RAPID FIXER is a rapid-acting, non-hardening fixer that should not be used with any hardeners. SIMPLICITY Wetting Agent Wetting agent sachet contains 25mL of ILFOTOL, of which two cap-fulls are required per use during the final rinse. This sachet contains enough wetting agent for eight rolls of 120 or 16 rolls of 35mm film in a two-reel, 600mL developing tank. NOTE: Sorry, no cancellations or returns due to the nature of this product. Limited Stock. Sometimes there is a shortage on this item. You will be notified immediately if not in stock or available.
Ilford SIMPLICITY Darkroom Chemistry Starter Pack 1178858
Ilford SIMPLICITY Darkroom Chemistry Starter Pack
Chemistry for 1x 120 or 2x 35mm Rolls
1 x 60mL Sachet of Film Developer
1 x 30mL Sachet of Stop Bath
1 x 100mL Sachet of Fixer
Containing all of the necessary chemistry for developing black and white film, the SIMPLICITY Starter Pack from Ilford contains pre-measured portions of four concentrated chemicals to produce working solutions for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank.
IMPLICITY
Film Developer
Film developer sachet contains 60mL of ILFOSOL 3 concentrate, which is then mixed with 540mL of water (1+9 dilution) at temperature to create a 600mL working solution for developing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank.
ILFOSOL 3 is characterized by its ability to produce fine grain results with high sharpness and full film speed, and it is particularly well-suited for use with medium-speed films.
SIMPLICITY
Stop Bath
Stop bath sachet contains 30mL of ILFOSTOP concentrate, which is then mixed with 570mL of water (1+19 dilution) at temperature to create a 600mL working solution for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank.
ILFOSTOP is a low odor, citric acid-based stop bath that stops the development process and helps to prolong the life and activity of the fixer solution. It is recommended to ensure accurate development times.
SIMPLICITY
Film Fixer
Fixer sachet contains 100mL of RAPID FIXER concentrate, which is then mixed with 500mL of water (1+5 dilution) at temperature to create a 600mL working solution for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank.
RAPID FIXER is a rapid-acting, non-hardening fixer that should not be used with any hardeners.
SIMPLICITY
Wetting Agent
Wetting agent sachet contains 25mL of ILFOTOL, of which two cap-fulls are required per use during the final rinse. This sachet contains enough wetting agent for eight rolls of 120 or 16 rolls of 35mm film in a two-reel, 600mL developing tank.
NOTE:
Sorry, no cancellations or returns due to the nature of this product.
Limited Stock. Sometimes there is a shortage on this item. You will be notified immediately if not in stock or available.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Shipping
Most orders will be shipped within 2-3 working days of receiving payment (Monday-Friday) and you should expect to receive it shortly if shipped via First Class or Priority.
Books, magazines and other preriodicals, are shipped via Economy mail and may take a bit longer and will save you money over the long run.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
( Unless specified in description as Final Sale only )
Any product you return must be in the same condition you received it and in the original packaging.
Ilford SIMPLICITY Darkroom Chemistry Starter Pack
Chemistry for 1x 120 or 2x 35mm Rolls
1 x 60mL Sachet of Film Developer
1 x 30mL Sachet of Stop Bath
1 x 100mL Sachet of Fixer
Containing all of the necessary chemistry for developing black and white film, the SIMPLICITY Starter Pack from Ilford contains pre-measured portions of four concentrated chemicals to produce working solutions for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank.
IMPLICITY
Film Developer
Film developer sachet contains 60mL of ILFOSOL 3 concentrate, which is then mixed with 540mL of water (1+9 dilution) at temperature to create a 600mL working solution for developing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank.
ILFOSOL 3 is characterized by its ability to produce fine grain results with high sharpness and full film speed, and it is particularly well-suited for use with medium-speed films.
SIMPLICITY
Stop Bath
Stop bath sachet contains 30mL of ILFOSTOP concentrate, which is then mixed with 570mL of water (1+19 dilution) at temperature to create a 600mL working solution for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank.
ILFOSTOP is a low odor, citric acid-based stop bath that stops the development process and helps to prolong the life and activity of the fixer solution. It is recommended to ensure accurate development times.
SIMPLICITY
Film Fixer
Fixer sachet contains 100mL of RAPID FIXER concentrate, which is then mixed with 500mL of water (1+5 dilution) at temperature to create a 600mL working solution for processing one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank.
RAPID FIXER is a rapid-acting, non-hardening fixer that should not be used with any hardeners.
SIMPLICITY
Wetting Agent
Wetting agent sachet contains 25mL of ILFOTOL, of which two cap-fulls are required per use during the final rinse. This sachet contains enough wetting agent for eight rolls of 120 or 16 rolls of 35mm film in a two-reel, 600mL developing tank.
NOTE:
Sorry, no cancellations or returns due to the nature of this product.
Limited Stock. Sometimes there is a shortage on this item. You will be notified immediately if not in stock or available.